Skip to content
(954) 773-18967712 West Oakland Park Blvd | Sunrise, FL 33351Mon–Fri 8–6:30 · Sat 8–4 · Sun Closed
Buying Tires

How to Read the Numbers on Your Tire Sidewall

The Extreme Tires team5 min read

The sidewall of your tire looks like a puzzle: something like P225/60R16 97T, plus more numbers and letters around it. It is actually a clear description of the tire, and once you know the pattern it takes ten seconds to read.

Decoding a size code

Take the example P225/60R16 97T and read it left to right.

  • P is the service type. P means passenger tire. LT means light truck, T means temporary spare, and ST means special trailer. Some tires omit the letter.
  • 225 is the section width in millimeters, the width of the tire.
  • 60 is the aspect ratio. This is the sidewall height as a percentage of the width, so here the sidewall is 60 percent as tall as the tire is wide.
  • R is the construction type. R stands for radial, which is what almost all modern passenger tires are.
  • 16 is the wheel diameter in inches. This must match your wheel.
  • 97 is the load index, a code for the maximum weight the tire can carry when inflated to its maximum pressure.
  • T is the speed rating, the maximum speed the tire is rated for. Always follow posted speed limits.

Why the size matters

When you replace tires, the size, load index and speed rating should meet the vehicle maker's specs. The door placard and owner's manual list the original size. If you are thinking about a different size, ask a tire professional first, since changes can affect speedometer accuracy, clearance and how the car handles.

The other markings on the sidewall

Maximum pressure

You will see a maximum inflation pressure on the sidewall. This is the most the tire can handle. It is not the pressure you should fill to. Use the number on your door placard or in your owner's manual instead.

UTQG ratings

Every passenger tire sold in the U.S. carries Uniform Tire Quality Grading ratings for treadwear, traction and temperature resistance. They help you compare tires within the grading system.

The DOT code

The letters "DOT" followed by a string of characters is the tire identification number. The last four digits tell you when the tire was made, as a week and a year. This matters for judging tire age. We explain it in our guide to the DOT date code.

Why this helps you in South Florida

Our drivers deal with heat, heavy rain and long highway runs. Knowing your tire's size, load and speed information makes it easier to shop, compare quotes and make sure a replacement matches what your vehicle needs. It also helps when you call a shop or order tires online: read them the size code and you are talking about the same tire.

Reading a tire for a replacement purchase

When you shop for new tires, write down the full size code, including the load index and speed rating, from the sidewall of the tire currently on your car. Better yet, take a photo of it. Then compare it to your door placard. If the two match, you are looking for the same size the vehicle maker intended.

If the numbers differ, because someone installed a different size before you, ask a professional which size is right for your vehicle. Fitment depends on more than the size alone.

Common sidewall mix-ups

  • Mixing up width and wheel size. The first number is width in millimeters, and the number after the R is wheel diameter in inches.
  • Reading the max psi as the target. It is a limit, not a recommendation.
  • Assuming LT and P tires are interchangeable. They are built for different uses, so ask before switching.
  • Ignoring the date. The size tells you what the tire is, and the DOT code tells you how old it is.

Quick checklist

  • Find your size code on the sidewall and compare it with the door placard.
  • Note the load index and speed rating for any replacement.
  • Ignore the sidewall maximum psi when filling. Use the placard.
  • Find the DOT code to check how old the tire is.
  • If you want to change size, ask a professional first.

Need a hand? We can check your tires at our shop in Sunrise, or come to you with Extreme Mobile Tires service across Broward, Miami-Dade and Palm Beach. Call (954) 773-1896 or book online.

Frequently asked questions

What does P225/60R16 mean on a tire?

P means passenger tire, 225 is the width in millimeters, 60 is the sidewall height as a percentage of width, R means radial, and 16 is the wheel diameter in inches.

What are the load index and speed rating?

The load index is a code for the maximum weight a tire can carry at its maximum pressure. The speed rating is the maximum speed the tire is rated for. Always follow posted speed limits.

Is the PSI on the sidewall the pressure I should use?

No. It is the maximum the tire can handle. Use the pressure on your vehicle's door placard or in your owner's manual.

Sources and further reading

Related guides

Need tires or a flat fixed?

Our mobile van comes to your home, work or roadside across Broward, Miami-Dade and Palm Beach. Or stop by the shop in Sunrise.